Ceramic Boost™

SKU: 641-123032.1.
Category: .
Protect

Ceramic Boost™

£8.50

An instant coat of protection utilising the latest in SiO2 technology. A spray on, rinse off formula for 2-3 months of protection

390 in stock

£8.50
500ml  |  SKU: 641-123032.1
Weight 600 g
Dimensions 30 × 10 × 10 mm
short_desc

Do not apply me onto a hot surface or in direct sunlight

volume

500ml

Sam's Method

Less is more with Ceramic Boost. Over applying will cause streaking on the paintwork. You should look to spray only 2 – 3 mists per panel, less is more with Ceramic Boost.

1.After your two bucket method spray Ceramic Boost over the entire wet paintwork. Our formula can also be used on side windows, trim and alloys.

  1. Allow the Ceramic Boost to sit for about 10 seconds to ensure the coating sinks down to cover all areas.
  1. Follow up with a rinse from your pressure washer to activate the coating, you will notice the instant protection straight away from the water behaviour.

* In warmer climates go slower over the paintwork to ensure even coverage and then rinse off instantly to avoid the product drying on the paintwork.

On hot panels you can use Ceramic Boost like a quick detailer instead!

The latest in SIO2 technology

Instant Ceramic Protection with
a spray on, rinse off formula

Lasts 2-3 months

Enhances gloss levels with
minimal efforts

SAM’S METHOD

1

Remember to always test the product on an inconspicuous area first. Do not apply on hot panels or in direct sunlight, if unsure then you can work panel by panel.

2

After shampooing and rinsing your vehicle, spray 2-3 squirts onto a wet panel. Follow up immediately by  rinsing thoroughly to activate the coating. Repeat on all panels. Do NOT over apply Ceramic Boost, as this can cause spotting.

3

Do not allow the product to dry. If this occurs you will need to use a cutting polish to remove the staining.

NEWSLETTER SUBSCRIPTION

Ceramic Boost™ £8.50